Vibration Feeder
The vibration feeder (R-series) is used for free flowing bulk material. It may also be used for difficult materials like fat containing powders or bulky materials like wood chips. Tietjen placed the first feeder of this series on the market in 1965.
The vibration feeder is driven by a magnet vibrator. It is built in six sizes up to models with high throughputs for feed mills with high capacity. Depending on requirements and regulations Tietjen builds vibration feeders in export version or explosion protected with ATEX certificate with explosion protection air inlet valve and safety slide.
Technical Details
- Rigid and proven design
- Wear resistant and low maintenance
- Standard painting RAL 7032 or 1015
| Feeder size |
R 200 | R 300 | R 400 | R 500 | R 650 | R 900 |
| Max. capacity at 0,6 t/m³ t/h | 5 | 8 | 18 | 35 | 55 | 75 |
| Max capacity m³/h | 8 | 13 | 30 | 58 | 90 | 125 |
| Dimensions and Weights | ||||||
| Working width of feeder mm | 200 | 300 | 400 | 500 | 650 | 900 |
| Height (flange to flange) approx. mm | 430 | 525 | 910 | 970 | 970 | 970 |
| Total width approx. mm | 355 | 455 | 630 | 810 | 960 | 1210 |
| Total length approx. mm | 730 | 930 | 1218 | 1402 | 1562 | 1532 |
| Weight (kg) | 150 | 190 | 330 | 410 | 460 | 510 |
Standard Supply and Options
Standard supply
- Closed conveying trough
- Manually operated slide for adjusting the product height
- Swivel out permanent magnet covering the complete width of the Feeder
- Flanges for inlet and outlet
- Large maintenance and cleaning door at front side
Optional equipment
- Servo drive with electronic position monitor for the product slide type ESP-X
- Explosion proof design (explosion pressure shock resistant 0,4 bar) according to ATEX regulations
- Aspiration air inlet with integrated A-Vent valve
- Sound enclosure