Alimentateur à vis TTS & TRS
- Des ponts relient les trémies d’alimentation aux broyeurs
- Pour les produits présentant de mauvaises propriétés de fluidité
- Dosage en fonction de la charge
- Complément idéal aux séparateurs air-gravité AGS et AGS AD
Dosage optimal du produit
The screw feeder is suitable for conveying and load dependent feeding of free-flowing bulk materials to the hammer mill. A reduced thread in the inlet and a double thread in the outlet ensure an optimal and continuous product flow. The trough is designed either as an U-through (TTS) or as a pipe (TRS). The standard series includes 6 different screw types, some in double screw arrangement. The trough length is 2000 mm. In addition, a large number of special designs (screw diameter, number of troughs, length, installation position, drive) are possible in order to individually adapt the screw to the installation situation.
Vos Avantages
- Precise, Load-dependent feeding of the hammer mill in combination with a controlled frequency converter
- Intake thread with reduced pitch for better discharge of the
material from a pre-hopper - Double thread in the outlet area with scrapers to equalize the product flow onto the mill
- Standard trough length 2000 mm
- 4 different screw diameters
- Design as single, twin, or triple screw
- Adaptable to the individual installation situation: special designs
possible (diameter, thread design, number of troughs, length,
arrangement, drive, wear protection)
- Robust welded steel construction for continuous industrial
operation (24/7) - Continuously welded screw thread on both sides
- Double Simmerring seal on both sides
- Pressure shock resistant and flameproof design (0.4 bar) optionally possible
- ATEX design according to zone 21 (II 2 D) inside and zone 22
(II 3 D) outside optionally possible
Détails techniques
| Types de machines | TTS/TRS 170 | TTS/TRS 220 | TTS/TRS 2170 | TTS/TRS 2220 | TTS/TRS 2270 | TTS/TRS 2320 | TTS/TRS 3170 | TTS/TRS 3320 |
| Diamètre de vis (mm) | 150 mm | 200 mm | 150 mm | 200 mm | 250 mm | Rejoignez l’équipe | 150 mm | Rejoignez l’équipe |
| Nombre de vis / Auge | 1 | 1 | 2 | 2 | 2 | 2 | 3 | 3 |
| Débit maxi à 0,65 t/m³ (t/h) | 5 t/h | 10 t/h | 10 t/h | 20 t/h | 37 t/h | 60 t/h | 19 t/h | 86 t/h |
| Dimensions | ||||||||
| Largeur d’auge (mm) | 170 mm | 220 mm | 2 x 170 mm | 2 x 220 mm | 2 x 270 mm | 2 x 320 mm | 3 x 170 mm | 3 x 320 mm |
| Longueur STD de l’auge (mm) | 2000 mm | 2000 mm | 2000 mm | 2000 mm | 2000 mm | 2000 mm | 2000 mm | 2000 mm |
| interne | ||||||||
| Nombre des motoréducteur | 1 | 1 | 2 | 2 | 2 | 2 | 3 | 3 |
| Puissances des moteurs d’entraînement (kW) | 1,5 kW | 1,5 – 3 kW | 1,5 kW | 1,5 – 3 kW | 2,2 – 3 kW | 4 kW | 1,5 kW | 3 kW |
Parlez-nous de votre défi. Nous trouverons la solution adaptée.
Décrivez-nous brièvement vos besoins : nous vous écoutons, posons les bonnes questions et développons à partir de là une solution Tietjen personnalisée pour votre application.