Hygiene Mill XDK
Hygienic Design for the Food Industry
- Grinding processes with strict hygiene requirements
- Stainless steel construction with reduced dead space
- Direct interior access via three maintenance doors
- Fast, residue-free wet cleaning and minimal setup times
Recommended for
Possible for
Ideal for the Food Industry
Consistent hygienic design for the food sector
The hygiene mill XDK is designed for grinding processes with strict hygiene requirements in the food industry. Manufactured entirely from stainless steel with a dead-space-reduced construction, it reliably prevents contamination and minimizes cleaning times. Three maintenance doors provide direct access for thorough wet cleaning with high-pressure washers, while customizable screen and rotor configurations offer high flexibility for a wide range of food applications.
Your Benefits
Flexible and efficient Grinding for Food Industry
- Energy-efficient fine grinding of fine and coarse grinding of food ingredients and other products
- Customizable screen and rotor configuration for a wide range of food grinding applications
- Optional additional grinding plates to enlarge the impact zone for higher fineness and a narrower grist spectrum
- Variable particle size distribution by adjusting beater speed (1,800–3,600 rpm via frequency converter), screen perforation, and beater configuration
Reliable Operation and Long Durability
- Robust welded steel construction
- Durable, optimized rotor design, dynamically balanced, operation in both directions of rotation
High Availability with Low Downtimes
- Rotor with short run-down time < 6 min without brake
- Large doors: Quick and easy access to the machine interior
- 2-part screen segments, quick and easy to replace segment by segment
High level of Safety for Personnel and Equipment
- Standstill monitoring with door safety device
- 0.4 bar pressure shock resistant and flameproof
- ATEX design in accordance with Zone 21 (II 2 D) inside and Zone 22 (II 3 D) outside
Certified FDA-compliant seals
Dead-space-optimized grinding chamber
Three maintenance doors for direct access
Motor base designed for easy cleaning
Technical Data
| Machine type | XDK 4 |
| Grinding chamber diameter [mm] | 800 |
| Screen width [mm] | 400 |
| Grinding chamber area [m²] | 0,8 |
| Dimensions and weights | |
| Length x width x height [mm] *depending on motor size | 2500 x 1350 x 1350 |
| Weight without motor [kg] | 1550 |
| Drive | |
| Motor size [kW] | 75 – 90 |
| Speed 50Hz/60Hz [rpm] | 3000 / 3600 |
| Speed with frequency converter 30-60 Hz [rpm] | 1800 – 3600 |
Download
Send Us a Message
Tell Us about Your Challenge. We´ll Find the Right Solution.
Briefly describe your requirements to us – we will listen, ask the right questions and develop a customised Tietjen solution for your application.