Hammer Mill HM
The small self-feeding hammer mill
- Ideal for smaller throughputs
- Self-conveying, pneumatic conveying
- Conveying distance of up to 12 m after the mill
- No additional aspiration
- Quick and easy screen replacement during standstill
Recommended for
Possible for
Our Universal and Small Hammer Mill
The hammer mill HM is a universal and small machine for grinding a wide range of products, such as grain, mixed feed, cleaning waste, fish meal, etc.
It is designed for pneumatic conveying of the ground product. A specially designed rotor, similar to a blower, generates a strong air flow for product transport through the mill into a separator. The HM series includes two housing sizes for motorization from 11 kW to 45 kW drive power.
Take Advantage of These Benefits
Efficient Grinding with Pneumatic Conveying
- Aspiration air is generated by the rotor itself
- Pneumatic conveying of the ground product up to 12 m downstream of the mill
- Discharge spout optionally on the right or left, depending on the installation
Reliable Operation and Long Durability
- Robust welded steel construction for continuous industrial operation (24/7)
- Grinding chamber equipped with wear elements to protect the housing, easy to replace
- Durable, optimized rotor design, dynamically balanced, operation in one direction of rotation
- Debris catching pocket for contaminants inside the grinding chamber to protect the screens
High Availability with Short Downtimes
- Rotor with short run-down time < 6 min without brake
- Large front door allows easy and quick access to the machine interior
- Screen without frame, easy and quick to change
High Safety of Personnel and Plant
- Standstill monitoring with door safety device
- Pressure shock resistant and flameproof design (0.4 bar)
- ATEX design according to Zone 21 (II 2 D) inside and Zone 22 (II 3 D) outside optionally possible
Foreign body catch trap
Outlet nozzle with flange
Grinding chamber temperature monitoring
Bearing temperature monitoring
Explosion venting valve
Technical Data
| Machine types | HM 1 | HM 3 |
| Grinding chamber diameter (mm) | 700 mm | 700 mm |
| Screen width (mm) | 150 mm | 250 mm |
| Grinding chamber area Grinding chamber area (m²) | 0.30 m² | 0.50 m² |
| Dimensions and Weight | ||
| Length* x width x height (approx. mm) | 1550 x 900 x 1200 mm | 1900 x 900 x 1200 mm |
| Weight without motor (approx. kg) | 500 kg | 610 kg |
| Drive | ||
| Motor size (kW) | 11 – 22 kW | 22 – 45 kW |
| Speed 50 Hz/60 Hz (rpm) | 3000/3600 | 3000/3600 |
| Speed with frequency converter 30-60 Hz (rpm) | 1800 – 3600 | 1800 – 3600 |
Send Us a Message
Tell Us about Your Challenge. We´ll Find the Right Solution.
Briefly describe your requirements to us – we will listen, ask the right questions and develop a customised Tietjen solution for your application.