Hammer Mill FD
Optimised for fine grinding
- For medium to high throughput
- Fine grinding, up to 98% < 400 μm possible
- Smallest screen apertures: from 0.75 to 2 mm
- Quick and easy screen change during standstill
Recommended for
Possible for
Designed for the Requirements of Fine Grinding
The hammer mill FD is a further development of our proven large chamber mills that has been specially optimised for fine grinding in the 400-800 μm range. It is therefore particularly suitable for demanding recipes in the pet food and fish feed sectors, but also for similar requirements in other products, such as the production of wood flour.
Take Advantage of These Benefits
Efficient Grinding for High Fineness Requirements
- Optimised impact zone with hardened impact plates on both sides of the inlet
- Extension of the impact area for higher finenesses and narrower grist spectrum possible with impact plates made of Hardox
- Stabilisation of the fine and thin screens by a support cage
- Special sealing of the screens so that no coarse off-spec grain gets into the product
- Variable grist spectrum by adjusting the beater circumferential speed (when using a frequency converter), the screen perforation and the beater configuration
Reliable Operation and Long Service Life
- Robust welded steel construction for continuous industrial operation (24/7)
- Grinding chamber equipped with wear elements to protect the housing, easy to change
- Durable, optimised rotor design, dynamically balanced, operation in both directions of rotation
- To protect the screens: foreign body catch trap for impurities inside the grinding chamber
High Availability with Low Downtimes
- Quick and easy change of beaters due to beater frame system, beaters can be exchanged outside the mill
- With a second set of beater frames, the machine is immediately ready for use again
- Rotor with short run-down time < 6 min without brake
- Wide-opening doors allow easy and quick access to the machine interior
- 4-part screen segments (max. 2 mm sheet thickness) without frame, easy and quick to change segment by segment
High Safety of Personnel and Plant
- Standstill monitoring with door safety device
- Pressure shock resistant and flameproof design (0.4 bar)
- ATEX design according to zone 21 (II 2 D) inside and zone 22 (II 3 D) outside optionally possible
Beater frame system for quick and easy beater change
Special screen sealing and support cage for fine grinding
Pneumatically operated inlet flap (option)
Additional impact plates instead of E the upper screens (option)
Bearing and grinding chamber temperature monitoring
Beater arrangement and wiping area adapted to fine grinding
Technical Data
| Machine types | FD 12 | FD 20 | FD 25 |
| Grinding chamber diameter (mm) | 1200 mm | 1200 mm | 1200 mm |
| Screen width (mm) | 640 mm | 1000 mm | 1250 mm |
| Grinding chamber area/screen area (m²) | 2.39/1,84 m² | 3.77/2,88 mm² | 4.72/3,6 mm² |
| Dimensions and weights* | |||
| Length x width x height (approx. mm) | 2610 x 1600 x 1600 mm | 3050 x 1600 x 1600 mm | 3300 x 1600 x 1600 mm |
| Width without motor (approx. kg) | 1900 kg | 2400 kg | 2800 kg |
| Motor size (kW) | 132-200 kW | 250-315 | 280-355 |
| Speed 50 Hz/60 Hz (rpm) | 1500/1800 | 1500/1800 | 1500/1800 |
| Speed with frequency converter 34-60 Hz (rpm) | 1000-1800 | 1000-1800 | 1000-1800 |
Send Us a Message
Tell Us about Your Challenge. We´ll Find the Right Solution.
Briefly describe your requirements to us – we will listen, ask the right questions and develop a customised Tietjen solution for your application.