References

By choosing a combination of a GDL 25 grinding module and crossyoke plansifter, the customer is receiving an energy-efficient solution that offers maximum flexibility and optimum granulation of the raw materials to produce premium pet food.

After replacing its old mill with a Tietjen GDL hammer mill, the compound feed manufacturer Hankkija achieved a 20% increase in productivity and was also able to reduce maintenance costs.

Öresundskraft is investing in the modernization of its biomass power plant. Tietjen is supplying a complex system for wood pellet processing.

Combined process: The wet hammer mill grinds 12 t/h of wood with a residual moisture content of 30-40 %. Fine grinding is carried out by a VDK hammer mill after drying

Lykkeslund Bioenergi has been using the BMS biomass shredder for over a year and produces 7 million m³ of biogas from 121,000 t/a of biomass.

DeHeus in Vietnam is increasing production capacity and is improving feed quality. At the same time, energy consumption will be reduced by 30% per tonne compared to the existing plant

By choosing a combination of a GDL 20 grinding module and Crossyoke Plansifter 1500, the customer receives a highly flexible, energy-efficient solution that offers optimum granulation of the raw materials to produce premium pet food.

The SD straw mill crushes straw for energy production in India. The biogas yield can be increased thanks to the good digestion with the SD straw mill.

TerraSol Wirtschaftsdünger GmbH invests in a BMS biomass shredder for solid manure processing. Tietjen’s solution impresses with its reliable operation, excellent impurity tolerance and optimum degree of disintegration.

By integrating the IMPRA mill, our customer can increase the capacity of the biogas plant by 30% and save 12% substrate at the same time.

Thanks to the new depackaging plant, NVM Biokraft GmbH is able to increase the dry matter content of the organic components to up to 20 %, which significantly the recycling options

The DRM depackaging machine was integrated into an existing system and impresses in practice with its robust design and fail-safe, economical operation.

For ara regio bern AG, Tietjen is installing a reception and treatment plant for biowaste, including a DRM depackaging machine for the production of biogas for the public gas network.

The new HM hammer mill for grinding malt sprouts impresses our customer Weyermann with: Finer grinding of the germ buds with increased throughput, 25% increase in silo capacity due to the fineness of the ground material and lower noise emissions.

Quality – Made in Germany – The high-speed mill VL has been used by Gut Rosenkranz for grinding grain for 36 years.

Our customer J. Müller achieves a purity level of around 95% in the production of fishmeal by using a VDK 4 hammer mill with an upstream cleaning system consisting of a drum screen and air separator.

Emsland Food is impressed by the Tietjen mills when it comes to grinding potato flakes – the defined particle size, quick screen changes, and low maintenance requirements when grinding potato flakes.

Beans are ground into bean flour for the production of gluten-free pasta. The achieved fineness of 99 % < 500 µm is achieved with the VDK hammer mill, suction-pneumatic flour conveying and total separator with pocket filter technology.

In BRATA KG’s latest breadcrumb plant, the company once again relies on a grinding module from Tietjen. The VDK hammer mill grinds white bread and bread roll leftovers for breadcrumb production.

Production of banana flour from dried bananas using the VDK hammer mill. The stainless steel mill grinds the dried bananas to a high degree of fineness.

At the Bioceval fishmeal factory in Cuxhaven, 125,000 tonnes of fish waste are processed into high-quality fishmeal and fish oil every year.

The combination of the GDX hammer mill and Ex-certified IE5 synchronous reluctance motors saves energy: up to 40% fewer losses in the production of compound feed.

At Stock Polska, three NDK wet hammer mills grind freshly harvested grain and maize for alcohol production.
Thanks to the wet process and stainless steel design, the system is particularly efficient, hygienic and low-maintenance – and meets the highest quality standards.

Nieuwland Feed & Supply Ltd in Canada receives a grinding system with the GDL hammer mill with quick screen change and can thus increase its production capacity while maintaining the same quality.